MODEL 120 SAGGING WINCH

Body made of Steel.
Helical Gears Duly Tempered.
Rotated on Thrust Bearings.
Pulley Suitable for 8-12mm Rope.
2 Speed Arrangement.
Extra Accessories for Tower Fixing Provided.
Working Load Shown With Help of 2 Nos. Four Sheave Sagg. Pulley Mod. 126

Model No.	All Dimension are in MM.				Working Load kg	Weight in Kg.
Model No.	A	B	C	D	Working Load kg	Weight in Kg.
120/1	375	380	315	160	7500	80
120/2	410	380	360	160	10000	108

MODEL 129 B.V. WINCH

Body made of Steel.
2 Speed Arrangement.
Gear made of Alloy Steel Duly Heat Treated.
Shafts Rotated on Thrust Bearing/Gun Metal Bush.

Model No.	All Dimension are in MM.			Working Load kg	Weight in Kg.
Model No.	A	B	C	Working Load kg	Weight in Kg.
129	610	205	110	10000	55

Direct Cap 2500 K.G. & with Help of Four Sh. Pulley 10000 K.G.
Extra Accessories for Tower Fixing Provided.

MODEL 130 DIESEL WINCH

Diesel Engine Power (hp)		6
Diesel Engine Model		R175A
Diesel Engine Speed (rpm)		2600
Pull force (KN) / Pull speed (m/min)	I shift	15/13.8
	II shift	30/5.7
	III shift	50/3.6
	Reverse shift	-/6.3
Diameter of Capstan (mm)		Φ160
Dimension (mm)		890 x 670 x 520
Weight (kg)		170

Application: It is used for pulling operation, tower erection and sagging operation in transmission line construction.

Features: Light weight, easy to operate and maintain. With automatic and safety brake system, for hold the line when the line is temporarily stopped

MODEL 130 PETROL WINCH

1	FRAME	1
2	ENGINE	1
3	CLUTCH PADEL	1
4	CLUTCH	1
5	GEAR LEVER	1
6	GEAR BOX	1
7	CUPLING	1
8	CAPSTAN	1
9	REDUCTION BOX	1
10	HOOK	4

Petrol Engine	7 H.P. - 3600 Rpm
Rated Tension	2000 Kgs.
Pull Tension	Min 3 Mtr/Minute Max 9 Mtr/Minute
Capstan	Single Capstan
Weight	180 Kg. Approx.
Transmission	Through Gear Change Hand Operation
Step	Forward 2 Step Reverse 1 Step
Breaking	Automatic
Dimension In MM	L 1400 W 535 H 600

Tolerance: ±5%
Notice: Outer specification may be changed without any information if necessary.

Back Next